-
Hallo,
ich habe eine Alarmanlage mit KNX-Interface deren Status wie auch wenn man das möchte die Schaltung über den KNX Bus erfolgen kann.
Ich meine in der letzten Keynote gesehen zu haben, dass Ala…
-
Please upgrade the used calimero version. Thanks
##
epike updated
7 years ago
-
I tested it with a Jung IP-Schnittstelle IPS 200 REG (LAN cable). OpenHAB 1.4.0 stable version.
I find it very easy to reproduce the problem: after all the system is up and running, I unplug the LAN c…
MMax2 updated
7 years ago
-
System: Ubuntu 14.04, Kernel 3.13.0-43-generic, knxd 0.1, libusb-1.0.0.19, Merten KNX USB 681829
If i startet knxd, my cpu load for this prozess is 100%.
-
... at least I think so.
I'm starting knxd with
```KNXD_OPTS="--eibaddr=1.0.0 --client-addrs=1.0.2:5 --Discovery --Routing --Server --listen-local --layer2=tpuarts:/dev/ttyKNX1"```
I use fhem …
-
-
Are there any known issue for the SamsungAC binding for newer models? In our house we have 3 Samsung devices working, 2 devices are from 2013 and the newest one was introduced in late 2014.
Both devi…
-
I have a nasty problem with one of my customer's installations. The symptoms:
- calimero is not able to receive any KNX telegram via routing or tunneling
- No telegram sent by calimero (either via ro…
-
I have a USB device
```
Bus 001 Device 006: ID 135e:0024
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.01
bDeviceClass 0 (Defined at…
ghost updated
7 years ago
-
```
openHAB should support signed 4 byte values on KNX bus. Right now KNX binding
doesn't support this type of values.
ABB ZS/S 1.1 Power meter interface uses 4 byte signed values with DPTs 14.056, …