-
**Description**
**Steps to reproduce the issue:**
1.Build the os using the hardknott branch
**Describe the results you received:**
linux-firmware-rpidistro-20190114-1+rpt11-r0 do_fetch…
-
Hi @leon-anavi,
thank you for creating this community-driven board support layer for RAUC :+1:
To be honest: This was on my wishlist for quite some time. That's also why, some time ago, I start…
-
Building the Yocto image for the reTerminal fails on Debian 11 with Yocto Hardknott:
```
| LD [M] /home/remy/b2qt/build-raspberrypi4-64/tmp/work/raspberrypi4_64-poky-linux/seeed-linux-d…
-
### Link
https://casaia.fr/product/module-relais-contact-sec-zigbee-2/
### Database entry
{"id":51,"type":"Router","ieeeAddr":"0x3c6a2cfffed0ecb3","nwkAddr":2620,"manufId":4412,"manufName":"CASAIA"…
-
**Description**
I am working on a RPi CM4 Lite board with meta-raspberrypi Warrior branch. I am facing some difficulties to build the image. for example, I had to change SRC_URI part in recip…
-
With dunfell I'm getting:
```
[Step 1/1] ERROR: linux-firmware-rpidistro-0.0+gitAUTOINC+f0ad1a42b0-r0 do_fetch: Fetcher failure: Unable to find revision f0ad1a42b051aa9da1d9e1dc606dd68ec2f163a5 in b…
-
branch:`hardknott`
bsp meta:`meta-raspberrypi/meta-meson`
**conf:**
```
PACKAGECONFIG_append_pn-chromium = " component-build proprietary-codecs use-vaapi"
PACKAGECONFIG_append_pn-gstreamer1.0-plu…
-
**Description**
No UART output on raspberry pi 3
Can anyone confirm if raspberry pi 3 UART out is working with the latest builds.But
I have not tested the HDMI out. But the green and red led are…
-
```
bitbake core-image-minimal
Build Configuration:
BB_VERSION = "1.53.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "universal"
TARGET_SYS = "aarch64-pok…
mfide updated
2 years ago
-
Hello, I writed a conf file to get the raspberrypi0-2 to work in 32 mode to have the camera packages raspivid. It works just fine. But the problem I don't have wlan0 interface. I tried everything bu…