-
Hi UW developers,
I have a problem in using Q2 element together with heat production sources.
After running for a few tens of myrs (23 myr for my case), the temperature field suddenly begins to go cr…
-
Improve stabilty and this next message disappear:
`ieee80211 phy1: check ba result error 1`
`[17730.156783] ieee80211 phy1: ampdu start error code: -22`
I followed this [tuto](http://networkgeekstuff…
jbsky updated
4 years ago
-
See this table for an overview. The current degrees of freedom are not valid for temperature load (they were good for traffic and pier settlement).
https://docs.google.com/spreadsheets/d/1q6h4RVGnk…
-
Wrote an output2 from the OS'd Nastran-95 on a SOL 1 static routine in hopes of importing it into pyNastran. I have CRODS and CTRIA3 in the model but only the CRODS seem to be imported so perhaps the…
ajrio updated
4 years ago
-
I am constantly running the tests of the Apps in the CI to see if I can reproduce the errors. I am compiling in FullDebug with `GLIBCXX_DEBUG` and run the small-suite with 2 omp threads
FYI @KratosMu…
-
## What happened
I've changed my CC2531 controller to a slaesh’s CC2652RB stick one. First I've flashed the CC2652RB, then I replaced the old stick to the new one, I started the zigbee, I saw…
-
### Description
Random layer shifts on different heights on both x and y axis, sometimes on both, sometimes just on one axis, reducing speed, acc and jerk, raising vref does not show any improvemen…
-
反馈bug/问题模板，提建议请删除
## 1.关于你要提交的问题
利用Github Actions在线编译失败
Q：是否搜索了issue (使用 "x" 选择)
* [x] 没有类似的issue
## 2. 详细叙述
### (1) 具体问题
A：
本地编译成功，同样的`.config`文件利用github actions编译无法通过
![图片](…
-
## Description
I'm trying to initialise external magnetic field using trapezoidal profile. However, at the left boundary of the simulation, I see a ramp in magnetic field strength despite I have se…
-
Now that we also remove the topology components that were previously loaded in case of error while loading topology, we need to make sure the pointers are valid while unloading. An example as noted by…