-
### The type of board you are using.
Other - please specify below
### The boards name or FQBN (e.g. esp8266:esp8266:d1_mini:eesz=4M3M,xtal=80) for unspecified board.
Arduino Nano 33 IOT
### The bo…
-
dose it support dmx512 for ic like ws2821 and other ic like that?
-
First of all: Thanks for all the work that has already been done to this project!
I'm trying to compile the current release of speeduino for stm32 targets (bluepill_f103c8 and generic). After downl…
-
Sat 09 Jun 2012 12:36:27 AM CEST
./include/util/delay_basic.h
implements:
void
_delay_loop_2(uint16_t __count)
{
**_asm_** volatile (
"1: sbiw %0,1" "\n\t"
"brne 1b"
: "=w" (__count)
: "0" (__coun…
-
```
$ avrdude -c programmer/s
```
shows the `avrdude.conf` definition of the _programmer_ as AVRDUDE understands it, including comments. This issue asks for Pull Requests that add comments in `sr…
-
**Description**
I like output like this
"{"header":["180B1254A963","ABCDA8F8ABCD"],"1":["device_query",],"2":["opened","true"],"3":["trigger,"4":["voltage","NaN"]}"
but get this
"{"header":["180B…
-
**Description**
FlowMeter example Simple.ino does not compile for Nano 33 IOT (using pin 2 or 3) and MKR 1010 (using pin 4) boards.
Compiles/Verify correctly for Uno and Nano boards.
**Reproducti…
-
Compiling the code on Windows 11 and the latest Arduino IDE 2.2.1 causes problems with the ArduinoPro-Mini (5v 16mhz) during compilation. Memory error with statement take out comments to get it fit.
…
-
According to uops.info and Agner these instructions all have a throughput of 1 on Icelake and run on port 0
```
vaddps %zmm0, %zmm1, %zmm2
vmulps %zmm0, %zmm1, %zmm2
```
llvm-mca claims they have…
-
### Machine Context
I connected a Nextion display to control my machine. It works fine for sending commands and running Gcode, but there is one problem - there is no feedback about the operation of t…