-
Hi,
I try to understand LQI, but I get different statements about the interpretation of the values:
**electrodragon**
`a low value indicates a better link than what a high value does`
> LQI …
-
Great project, with detailed documentation and easy-to-set-up hardware; thanks a lot!
I have had issues with my motors before; Sometimes, when pushing the up or down button at the remotes, they are…
-
I am using :
- development branch
- CC1101 : https://www.aliexpress.com/item/33059343309.html
- ESP32-WROOM-32D DevkitC_v4
- Power by USB. Power the module via the 3v3 pin on the ESP32 : is it ho…
-
**Describe the bug**
Setting up SRX882S to receive RF with ESP8266 or ESP32, changed pins in Arduino per recommendation and device works I can see it online and connected but no RF reception.
![i…
-
I bought a nano CUL, but after loading this software nothing happens.
I suspect that the pinout of the device is different from the pinout that is currently supported.
The device I have is this …
-
Hi all,
I seem to have an issue with evofw3 and my "german" nanoCUL. I flashed initially the latest version of evofw3 but it does not seem to work - the device "is" transmitting (i think) but no on…
-
Update between v0.1.7 and v0.1.8 breaks readout from Silvercrest RollingCode-RemoteControl (was formerly recognized as Smoke-GS558)
i fiddled down the problem to a change in pulse_demod.c
https:…
-
Hi there,
I am using a ESP32-C3-DevKitM-1 which I want to use for this project. The flashing works like a charm using the ESPHome web but afterwards I do not get a Wifi AP named ESPSomfy RTS to se…
-
Hello,
After OMG upgrade from 1.4.0 to 1.5.0 with same HW & SW configuration I didn't receive WS2032 weather station messages anymore. Messages from other 433 devices like Nexus-T, inFactory-TH, G…
-
I've set ELECHOUSE_cc1101.setModulation(0); under .Init() .
The other example that uses internal transmission works well, but how does internal transmission differ from SetTx()? For the rc-switch …