-
Let's say for example my machine represents a light bulb. The two obvious states would be 'on' and 'off'.
But, if the bulb is dimmable and the dimmer value is some value between 1 and 100 how would I…
-
Hello! Paying customer here. Love the theme!
One thing I wish it had is more color for JSDoc parts and decorators.
Here's what it currently looks like:
Here's what it looks like with the …
-
* OH2 Version: 2.4.0.M5
Performing discovery causes the following NPE:
```
018-11-22 11:26:11.662 [DEBUG] [wave.discovery.ZWaveDiscoveryService] - ZWave discovery: Start zwave:serial_zstick:512
…
-
The past few months I've encountered some non critical startup errors with the blueprints I use. The errors seem not to cause any malfunctions during usage, only startup errors.
Is it something I'v…
-
### The problem
i have glass9 which have 2 shutters 2 button and 3 virtual switch
i checked the zwave network and the shutters recognized as c class motor.
but in home assistant, it's show as light…
-
Not sure how feasible it is to enable this since I believe it would have to appear as another dimmer in the fan's settings and turning it on would turn off the main uplight/downlight, but it would be …
-
For example saying “TV sound to ten” would trigger a script and pass or set that 10% somewhere in a temp file for that script to read. Not even sure if that’s possible but this would open doors to som…
-
If i try to add the lines from the example code:
- channel: 50
name: sp4led_1_dimmer
default_level: 255
type: fixed
I get the following message when…
-
## Expected Behavior
When setting a value between 0 and 100, I expect the roller shutter to be set to this pre-calibrated position.
## Current Behavior
Randomly (no every time) values are mapped …
-
Need to install or replace some bulbs.