-
Reported on the forum:
https://forum.mysensors.org/topic/8814/cleareprom-does-not-work-for-sensebender-gw
When clearing eeprom, operation is halted.
-
https://github.com/wiremod/wire/blob/ec5cddcacb6f71b41e3d8ae9baea89b7ba21a154/lua/wire/stools/hdd.lua#L75-L247
According to the last relevant update, this was supposed to be finalized in "the next up…
-
```
stcgal -p COM3 -P stc8 .pio\build\STC8H1K16-rev52\firmware.hex
Waiting for MCU, please cycle power: done
Target model:
Name: STC8H1K16
Magic: F721
Code flash: 16.0 KB
EEPR…
-
#### Description
The inefficiency is in SfpBase, xcvr_mem_maps etc and this also affects xcvrd, since both xcvrd and sfputil use the same api's of SfpBase such as `get_transceiver_info & g…
-
Since this is a drop-in replacement for libudev/libeudev, should I purge libudev/libeudev before installing this on the system?
The problem is that Devuan seems to heavily depend on libeudev, and p…
-
Hello
May I ask a question
LAN9252 comes with 16 GPIO built-in, and I can run the LAN9252 core board using the Dig_8IN_8OUT.xml file you provided.
I want to configure it with 12 digital inputs and …
-
**PLEASE DELETE THE TEXT ABOVE AFTER READING AND UNDERSTANDING IT**
****
## Current Behavior
INAV runs properly on flight controller when configurator is connected until EEPROM is saved without …
-
when trying to recive 48 universes of 1020 leds x 8 strips it says impossible to create buffer
even when trying 800 * 8
15:19:56.670 -> [ 1245][I][artnetESP32V2.cpp:233] _initialize(): [ARTNETE…
-
If the code is built for EEPROM and you boot without the EEPROM attached, the program does not respond to the USB serial port and appears to be hung.
This was an issue because the EEPROM is located…
-
When autosave is disabled it removes the commit call from the saveSettings():
https://github.com/xoseperez/espurna/blob/88a7076ad3b906f8aeee0ae6978332f0e61b4335/code/espurna/settings.ino#L367-L371
…
mcspr updated
5 years ago