-
I have used FSM ULP on ESP32 to read the processor temperature, using tsens instruction assembly, but now I want to read the processor temperature through riscv ulp on esp32s3, but I can't find releva…
-
Hi
use ESP-IDF 5.1.3
use MESH-LITE 0.10.3
I don't understand why. My firmware suddenly had such an error today when performing OTA. The app_1 partition could not be overwritten normally, causin…
-
I use AIR780E and ESP32-S3 with USB
config：
CONFIG_BRIDGE_MODEM_USB_VID=0x19D1
CONFIG_BRIDGE_MODEM_USB_PID=0x1
CONFIG_BRIDGE_MODEM_USB_INTERFACE_NUMBER=2
Same issues as closed issues:
Configur…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
ONLYA updated
4 months ago
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
----------------------------- Delete below -----------------------------
If your issue is a general question, starts similar to "How do I..", or is related to 3rd party development kits/libs, pleas…
-
Hi
Is it possible to compile a build for ESP32 S3 ?
Thank you.
-
How to connect the battery to “ESP32 S3 Sense”? Thank you!
-
Hi, I'm using one esp32s3 and a router to collect CSI data. When I successully build and flash `console_test` project following section 3.2 in `README.md` , I then followed section 3.3 and successfuly…