-
Hello,
Here is the info from the console of the device:
Thermostat stats:
Thermostat: RC300/RC310/Moduline 3000/Bosch CW400/W-B Sense II (DeviceID:0x10 ProductID:158 Version:33.04)
Thermosta…
-
In master we had `paradox/states/partitions/PARTITION/current_hass` aggregated topic, and `MQTT_PARTITION_HOMEASSISTANT_STATES` `MQTT_PARTITION_HOMEASSISTANT_COMMANDS` mappings. Though they were inten…
-
Belgium always has a generation of 0,5 to 1GW from unknown sources. This generation is rated at 700g/kWh the equivalent to coal, however Belgium does not have a single coal plant in service. The Belgi…
-
All in the g-sheet:
- Loft hatches etc (LRA codes) - These are in the G-sheet but don't appear to be in either library. All types of loft hatch need to be in both libraries (existing and proposed…
ghost updated
5 years ago
-
I have used the National Net voor de Toekomst scenario and changed the flex merit order to favor P2H for industry, but almost nothing happens. I noticed that I cannot increase the sliders beyond what …
-
Hello,
I have Buderus Logomax Plus GB1721i-24 with separate water tank.
Some values are missing in EMS gateway:
Boiler Temperature
Return Temperature
System Presure
Maybe i can fine tune s…
-
Hi,
With the new moduline 3000 thermostat, when using the hot tap water en central heating is not correct I think. What values does the use?
Gas = on , and burner on, etc.
regards Richard
-
## Description of the issue
There are several issues on subclasses of class 'Generator' #159, #160, #161, #162 and the old issue #55.
1. Before solving those issues, purpose, definition and class…
-
Hello, everyone. Now I need to build a thermal network on the CHP unit. Can PYPSA achieve this function?
-
Hello
For this device BHT-002- GCLW (Water/Gas Boiler) everything is ok too.
Thanks for the library.