-
```
hello 8) , i just wanna do a simple rangrefinder with a hc-sr04 and a tiny oled
128x64_i2c but no sucess ....
i try to combine 2 sketchs, 1 for the ultrasonic sensor and 1 for the screen.
So on …
-
```
What steps will reproduce the problem?
1.I read all issues dealing with SSD1306 OLED display, but I cannot run it
What is the expected output? What do you see instead?
Something on the display :…
-
```
With an extra VCC line, the lifetime of OLEDS can be extendend.
Init sequence needs an extra command to enable this (U8G_ESC_VCC(1))
Howerver, the functionality (u8g_SetVCC()) is not yet implement…
-
Switch the commentar of the last lines of setup and loop functions are not working on the HELTEC WiFi LoRa 32 V2
Link to Pin-Out: https://resource.heltec.cn/download/WiFi_LoRa_32/WIFI_LoRa_32_V2.pdf
…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
the seeedstudio XIAO expansion base is a nice carrier board that the QT Py ESP32C3 can be plugged into. it has an 0.96" OLED display.
the Seeedstudio docs don't explicitly say what part the OLED is,…
-
Здравейте!
От няколко дни добавката отново работи без грешка.
Благодаря!
-
Hi team, is there any sample for SSD1306 based OLED display? Can you please share? I am looking for 128x32 display.
Thanks.
-
### Link to repository
https://github.com/cadojo/catppuccin
### Screenshots
### Any additional comments?
This project simply adapts pre-written Quarto website theme files with the Catppuccin…
-
```
Hi, please, I amplaying with OLED 132x64 from ali. OLED is working, but I can
use only 128x64 area, first/last two adresses (pixels) aren't accessable (I
have to set start pointer to 2,0 and las…