-
```
Thanks for the code u provided.It works fine.
What if i want upload or store captured image using asp.net server code like c#.
i new to php hence don't know much about it.
i want to do it with c# …
-
Hi,
I am newbie trying to run the rpos in raspberry pi 4.Not able to get the rtsp working.
Initially got the following errror
_rtspServer error: Error: spawn ./bin/rtspServer ENOENT
at Process…
-
Here's a couple of images. Looks similar to the board in #11 from @swisslegacy
![PXL_20210207_233815784.jpg](https://user-images.githubusercontent.com/841440/107162850-e93a4e00-6973-11eb-9aca-45b2a…
guino updated
2 years ago
-
Moonfire NVR's file rotation currently doesn't leave any reserve for the recording that's in progress (which can be up to two minutes). The user is expected to do this, as described in the [install do…
-
Hi, first great job!
I am using now docker motioneye works well!
motionEye Version | 0.43.1b1
Motion Version | 4.6.0
Python 3.11.6
Could you update motioneye-audio.sh to Python 3?
I tried using…
-
I have some of my cameras that are connected to the NVR in home assistant installed with HACS. I'm fairly new to HA so I am still trying to figure it all out.
The cameras I connected only show 3 e…
-
**Checklist:**
- [x] I updated to the latest version available
- [x] I cleared the cache of my browser
**Release with the issue:**
v5.2.0
**Last working release (if known):**
na
**Brows…
-
I have a ppstrong based camera with the hi3518ev300 SoC (board SPEED5S-H1MB_F23) where I have successfully flashed OpenIPC.
No longer on the cloud and I now can stream hls, rtsp, mjpeg, ...
Which So…
-
Hello,
I have the stream url which works well in vlc, but when I add it in motioeye, I only get the no camera symbol.
My config is :
```
netcam_url rtsp://192.168.1.76:554/cam/realmonitor?chann…
-
I have new 2K model CMSXJ19E.
Would this customized firmware also working with this model?
I´m not sure with the chipset.