-
### The problem
With
* A AI-Thinker ESP32-CAM
* Using a `esp32_camera:` component
* A esp32.board of `esp32cam`
I see the following issues
1. The unit frequently disconnects from the HomeAss…
-
Hi,
First of all, "THANK YOU" for that nice Guide. 💯
It is idiotproof. I prooved it. 😄
So i decidet to make some more horsepowers and want to remove the Pressure Sensor. Because of physical …
-
Hi, it would be great if the tool change workflow could be improved in the following ways:
* Capture a tool change location in machine coordinates that gSender goes to prior to the change, similar …
-
This repository has no existing draft.
From the workshop notes:
#### standard (required)
- temperature (scalar)
- pressure -> sometimes missing, sometimes standalone msg
- conductivity or salin…
-
Seems the app is looking for ttyUSB0, can a ttyUSB1 be added as well as a second RS485 interface? One for pump and one for heater.
-
On my 7920 (workstation tower), there are at least 10 fans. I added this to `fan_speed` in i8kctl.c:
for (int x = 0; x < 20; x++) printf("%d: %d\n", x, i8k_get_fan_speed(x));
And with that …
-
Hi Vitotai,
Love BPL. its the best.
Is there a command that can be issued by JSON or similar to reset the BPL over the gui/remotely. I am having some minor problems and having to power cycle the dev…
-
I've started down the road of trying to integrate Delta 2 data with HA via MQTT...
I already have mosquito broker setup as per the instructions from @lwsrbrts in ISSUE #1 and my tweaks for SHP per…
-
```
Menci@Menci-Surface:~$ lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 08)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 520 (rev 07)
00…
Menci updated
4 years ago
-
After ı try to config and update, my robin V2.4 board, screen turn to white. and ı could not do anything.
could any body help me solved this issue.
what is the suitable firmware with robin 2.4 bo…