-
**Describe the bug**
Curtain motor has no entities.
**Expected behavior**
Entities for opening and closing curtain and if possible slider to set partially closed
```yaml
{
"node_desc…
-
### What happened?
I am using a Sonoff 2652P coordinator with all Tuya switches via Zigbee2MQTT and Mosquito (installed on a Synology virtual machine). Everything works as expected except one thing…
-
### What happened?
The Sonoff [SNZB-04P](https://www.zigbee2mqtt.io/devices/SNZB-04P.html#sonoff-snzb-04p) device doesn't report the power source (which should be battery). Instead, it shows `?`. Thi…
-
Hi, after 2 days of trying to beat this thing...
Apparently if the SSID contain “-“ or “‘“ (I don’t know if it’s just one of them - I have them both) the Sonoff can’t login the network after visiting…
-
https://github.com/vincenzosuraci/hassio_shelly_cloud
http://www.thesmarthomehookup.com/use-the-rest-component-to-add-a-shelly-switch-to-home-assistant/
http://domoticageeks.com/forum/showthread…
-
### What happened?
Trying to change reporting on change of temperature from 20 to 10.
Woke up the device first and presses apply.
No errors but device is ignoring the change it still only reports…
-
Given that we're about to get a new tube for Gerald #987, it would be the perfect time to start logging how many hours usage we get for him.
It looks like most of this is already implemented for So…
-
Hi!
I flash the ATMEGA328 succesfully and the esp8266 too. But when I try to go to the webinterface it shows the password dialog. I put it, but then, I always received a 404 error.
I flashed th…
-
I am running NCP on MGM210PA32 Module from Silabs. I have connected NCP to my PC over UART. Below is the log when I run my .Net application. I got an error "NCP requires unsupported version of EZSP". …
-
### What happened?
Referenced from reply on slightly different error.
Facing this after updating fw:
```
[13:19:54] INFO: Preparing to start...
[13:19:54] INFO: Socat not enabled
[13:19:55]…