-
Hi,
I am using a custom board with nothing but LoRa murata IC and two relays. I made a small program to test the stop and sleep function.
I cannot see the controller going in the sleep/stop mode. …
-
Works perfect across the table on linux, but no matter what I try it won't work with windows (tried with avrdude [7.0](https://github.com/mcuee/avrdude/releases/tag/v7.0) and [7.2_mingw64.zip](https:/…
-
### The problem
I am trying to set up a basic IR receiver to record IR codes for a project. I started by flashing the board over USB with https://web.esphome.io/ "Prepare for First Use" in Chrome. …
-
compilation terminate with error with a message 'no space left on device'
Context : Marlin 2.0.9.3 on Monster8 v1
see detail below
欢迎使用MKS Compile Toolhttps://www.baizhongyun.cn/home/mkscom…
-
LeafMiner v 0.0.13
[Module with ESP32-WROOM-32](https://www.aliexpress.com/item/1005006336964908.html) has USB-C with HL-340 UART, 4MB of FLASH, 30 pins, 2 buttons, 2 LEDs. It can run NerdMiner_V2 …
-
I get the following error and I can not seem to find a solution.
Compiling .pio\build\STM32F103RC_btt_512K\liba17\USBComposite\Consumer.cpp.o
.pio\libdeps\STM32F103RC_btt_512K\Adafruit BusIO_ID62…
-
### CircuitPython version
```python
adafruit-circuitpython-hardkernel_odroid_go-en_US-8.1.0.bin
```
### Code/REPL
```python
import os
os.listdir()
```
### Behavior
reboot freshly imaged ODroid…
-
Hi, what version of gcc-arm-none-eabi is required to build this?
I've tried 8.2.0 on arch and it gives me this:
```
Linking: nitrokey-pro-firmware.elf
arm-none-eabi-gcc -mthumb -mcpu=cortex-m3 …
-
Ref. schematic R4006-G0001-03-SC-REV02.pdf
If using the USB interface (FT432, sht. 24), the FPGA JTAG signals are double-terminated by resistors shown at sht. 24, zone B11:
> ![image](https://us…
-
Hello,
I was looking for support for a Thrustmaster TX wheel. Mine is the Ferrari 458 wheel, but it is technically a Thrustmaster TX.
https://support.thrustmaster.com/en/product/txracingwheel-en…