-
eTeak as the same as its predecessor counterpart, the Balsa synthesis system, reports area estimation of the generated Verilog circuit. However, this highly depends on the utilised cell library (ASI…
-
Ref: csa2, "flame demo -- 106 bytes", [here](https://groups.google.com/d/msg/comp.sys.apple2/ahICujAJ2YM/p99OrdGPDgAJ)
On 2019-01-05, qkumba wrote:
> I suspect that it's set (or not) randomly on …
tomcw updated
5 years ago
-
Hi,
I have a RISC-V dual issue core (need 4R2W 32 bits 64 words) and was looking for a register file implementation.
I first tried to use latch + tristate based HDL directly on openlane / sky130, …
-
### Problem Description
2024-09-29 17:59:20.236408: E external/local_xla/xla/stream_executor/plugin_registry.cc:91] Invalid plugin kind specified: FFT
2024-09-29 17:59:20.263474: I tensorflow/core/p…
-
I'm getting around 30% rejection rate for my ks0. I'm using the forked ksb with iceriver support but I just wanted to know how to troubleshoot and tweak the config file for high rejection rates.
…
-
This new version can finally connect to the service it needs to. When launching the application it greets with a warning that some features may not work, please run `AddUserToGroup.bat` script as admi…
-
When using Alpine Linux with musl libc on an ARM32v6 system
```
Thread 14 "miner_GSD0aa" received signal SIGSEGV, Segmentation fault.
[Switching to LWP 13764]
0xb6fb437c in memcpy () from /lib/ld-…
-
**Description**
several platform related cases skipped on Arista platform due to "No fans found on device" and "No modules found on device"
**Steps to reproduce the issue:**
1. run the be…
-
The main issue to be addressed in such a section (perhaps an appendix) is: Does the hardware target support applying a single "physical" P4 table for both net-to-host and host-to-net packets.
My cu…
-
### Problem Description
I have tried using Flash Attention in this repo on a server with MI250x devices and found that training is not stable:
In the figure, all the fluctuating curves are wit…