-
```
What steps will reproduce the problem?
1.Attach TTL Adapter
2.Load Arduino 1.6.1
3.Load any ino - file
4. try uploading it
What is the exact brand and model of hardware you´r using?
Hardware Feat…
-
Hi, wonder if you would like to host our Grbl port to ARM STM32F103?
Thanks,
Paul (awesome.tech)
-
So I've tried 57600, and it's pretty hard to get it to work reliably.
I would prefer 115200, only my MCP2200 serial chips work at 57600.
I think it would be easier to use 115200, all UNO boards ha…
-
The list of chips that are nominally supposed to be supported by Optiboot seems to be growing quite long; much larger than I'm able to test myself.
I'd like to build a network of people who are willi…
-
```
What steps will reproduce the problem?
1.Attach TTL Adapter
2.Load Arduino 1.6.1
3.Load any ino - file
4. try uploading it
What is the exact brand and model of hardware you´r using?
Hardware Feat…
-
```
What steps will reproduce the problem?
1.Attach TTL Adapter
2.Load Arduino 1.6.1
3.Load any ino - file
4. try uploading it
What is the exact brand and model of hardware you´r using?
Hardware Feat…
-
```
What steps will reproduce the problem?
1. Run the attached sketch.
What is the expected output? What do you see instead?
The LED should not turn on, but it does.
What version of the product are …
-
The current footprint accommodates a 32MHz crystal but needs to accommodate an 8-12MHz SMD crystal @3.3VDC. The common footprint size seems to be 5mm x 3.2mm dual pad. Representative [crystals at Mo…
-
```
What steps will reproduce the problem?
1. Run the attached sketch.
What is the expected output? What do you see instead?
The LED should not turn on, but it does.
What version of the product are …
-
# Steps to reproduce the problem
1. Install `MicroDrop v2.7`
2. Install and enable `microdrop.mr-box-peripheral-board-plugin 0.3`
# Result
The DropBot is able to connect, but the periphera…