-
Please complete as many of the sections below, if applicable, to provide the most information that may help with investigating your issue.
### Describe the problem/bug
Using a Sparkfun Environme…
-
### Answers checklist.
- [X] I have read the documentation [ESP Zigbee SDK Programming Guide](https://docs.espressif.com/projects/esp-zigbee-sdk) and the issue is not addressed there.
- [X] I have up…
-
I'm using a BME280 in a weather station. The sensor is contained in a 3D printed Stevenson screen and I believe it is fairly well protected from the direct effects of rainfall. I may at some future …
-
Adafruit BME280.begin() does not support specifying custom pins for I2C.
(While for SPI specifying custom pins is supported.)
ESP32 supports 2 hardware I2C interfaces but BME280 library can only …
lnlp updated
7 months ago
-
Using this machine as a torrent downloader with Transmission, Sonarr, Radarr, Jackett, etc. I know these programs are heavy on RAM, but oom-killer gets triggered even when memory usage is lower than 1…
-
To interface the BME280 sensor to the RPi (with I2C)
DoD: Successfully read temperature, humidity and barometric pressure readings from the sensor
Blockers: None
-
The aim of these issues is to exchange the [MOD-ENV](https://www.olimex.com/Products/Modules/Sensors/MOD-ENV/open-source-hardware) module with [MOD-BME280](https://www.olimex.com/Products/Modules/Sens…
-
ERROR main - exception in mainloop, TypeError: argument must be an int, or have a fileno() method. --- details: -----------------
None
--- traceback: ---------------
Traceback (most recent call las…
-
Minor suggestion on documentation. For my beaglebone blue, the temp, humidity and pressure readings were accessible under /sys/class/bme280 vs. /sys/bme280. Feel free to close the issue, I just wanted…
-
Hello,
I built up two of the tinnymodbus. Flashing over modbus works fine. I can also read out the internal voltage (0x03 0x0003), the internal temperature is too high.
I tested with a DS18S20 and …
Fux2 updated
7 months ago