-
While building the ZigBee network I noticed that all routers have lqi 1 or 0 to the coordinator. E.g. DW.Testing (door contact) are much further than both routers.
Coordinator: 1352P with external a…
-
the switch QBKG03LM is successfully paired with cc2530 + cp2102, is shown in ZHA. When physically turning on / off, the status changes in the HA (0,108,2) interface. But changing the status from the H…
-
# Bug Report
## What happened
I switched over my Hive SLR2/SLT3 combination to zigbee2mqtt, went through pairing as per pairing instructions and I get the devices visible in zigbee2mqtt; I can contr…
-
When I connect the zzh to different antenna (dual band WiFi +9dbi), Z2M seems to have problems with reception. There are simply no signals coming in. According to dmesg, the adapter has been detected …
-
Hi,
Including @ptvoinfo as well, as he's he ultimate developer for the custom firmware.
I'm playing with a CC2530 Dev board, flashed with the latest PTVO firmware. I can see it's properly recogn…
-
# Bug Report
## What happened
It seems my coordinator is not able to add new device by triggering the permit join event after the very first boot up. The only way to add new devices is to …
saury updated
3 years ago
-
Hello,
I'm just doing a double check if it's possible to use [this board](https://www.aliexpress.com/item/4000834166422.html) as a router with Zigbee2mqtt? I found it on https://www.zigbee2mqtt.io/…
-
# Bug Report
## What happened
i have had many, maybe all, of my cree bulbs randomly flash on and immediately turn off. this happens day or night. in the logs there is an announcement as if it is a n…
-
I can't get my Smart Valve Controller paired. I have already paired other Zigbee devices only this device does not want to.
For information I have another CC2531 stick in use, on which the valve cont…
-
# Bug Report
## What happened
Followed the installation of the Zigbee2MQTT from the https://www.zigbee2mqtt.io/getting_started/running_zigbee2mqtt.html and Zigbee2MQTT starts and runs just f…