-
I'm using xclip to copy things to a clipboard, images don't seem to paste in to Aseprite when copied and instead it pastes the last "paste-able" object. if i copy an image from a browser it works fine…
-
My log
[2022-11-10 22:02:40.288903 +08:00] INFO [src/trident.rs:274] static_config Config {
controller_ips: [
"10.1.11.231",
],
controller_port: 30035,
controller_tls_por…
-
Like #178
-
(WEB REPORT BY: exabod1 REMOTE: 206.221.180.138:7777)
# Revision
e37bd3880fc7e30d48c74bd3508bfbf47ee7f247
# Description
Trying to replace a body's head will instantly revert back to its original …
-
### Prompt
I have very not dense design. DECAP12 has 80% coverage of the area, and since all spare locations have DECAP12, it means that I will always be above 40% maximal area for LI1.
### Propos…
-
Hi,
I set up upg-vpp as UPF with free5GC SMF, and used UERANSIM to test UE traffic by sending ping requests.
The uplink tunnel worked well, but the downlink did not.
Below is my setting and if t…
-
# Expected Behavior
agent serive goes well
# Actual Behavior
agent service exit
# Steps to Reproduce the Problem
1. KVM node(Ubuntu20.04)
2. Install deb
3. check agent serice
```
root@…
-
## Clean checkout and cook does not seem to produce working images
I have been having a lot of trouble building a working image for pico pi imx7d.
The `cook -j12` command does not seem to produce…
-
### Description
I've been trying to harden my SoC using openlane. I was successful in hardening all my macros, but the flow fails when I try to integrate the macros in the final design. The error…
-
Hi,
The gds folder in sky130A has only decap, fakediode and fill cell gds. This is causing the following error. Do we need to copy the std cell gds to the gds folder in sky130A.
[ERROR] LEF Ce…