-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Hello,
After cloning the `esp-who` repo and I tried to build the example `../../motion_detection/terminal`, it throws,
```
mac@machine:~/esp/esp-who/examples/motion_detection/terminal$ idf.py …
-
Hello!
Thanks for your code, it is very much appreciated!
At first, I'm not a programmer at all, barely able to use pre made code!
I succed in flashing the ESP, configuring the CAN settings and whi…
-
**Describe the bug**
After I solved the compile issues described in issue 156, my project produced a bootloop. I thought the problem was in my code, but I narrowed it down to a call on ESPUI.prepareF…
-
### Basic Infos
#### Hardware
**WiFimanager Branch/Release:**
- [ ] Master
- [X] Development (OTA)
**Esp8266/Esp32:**
- [X] ESP8266
- [ ] ESP32
**Hardware: ESP-12e, esp01, esp25**
- […
zen85 updated
2 years ago
-
I have the VS1053 module (MP3/ACC decoder), VS1338B module (IR), KCX_BT_EMITTER module (Bluetooth transmitter), BUT not the Nextion NX4024T032_011 display is not working. Other than the display the ra…
-
This is not really an issue, its just a piece of information.
Unlike marlin, grbl-Mega seems to correctly enable the SD Crad in such a way that the Toshiba FlashAir Wifi SD card works correctly and…
-
### Board
ESP32 Dev Module, custom board
### Device Description
ESP32 Dev Module, custom board
### Hardware Configuration
Quectel 2G modem attached to pin 26 and 27 of the esp32
### Version
lat…
-
### Wiki Search Terms
N/A
### Controller Board
Custom ESP32-S3 board
### Machine Description
3-axis gantry machine
### Input Circuits
_No response_
### Configuration file
```yaml
name: "custo…
-
### Board
esp32-wroom-32
### Device Description
Custon hardware Develop
### Hardware Configuration
GPIO 32 used as interrupt input
### Version
v2.0.12
### IDE Name
Sloeber
### Operating Syst…