-
{"format":"img","language":"zh_CN","model":"SA6400","version":"7.1.1-42962-0","addons":"acpid,mountloader,powersched,reboottoloader,cpuinfo,sensors,nvmevolume,nvmesystem,nvmecache,storagepanel,sortnet…
-
Hello everyone, here I add a w83795adg and two temperature sensors on it, but they have no effect.I checked the experience of other people in the list and found that my / sys / class / hwmon did not g…
wws66 updated
4 years ago
-
Hi,
I just found this great piece of software when searching for usable libraries to use in my PI-project. I own two RPi-UI boards both with i2c as interface.
I changed the code in menu.py to reflec…
-
Hi,
I see you made a little maintenance routine (core1_code) to run on core1. In comments you wrote "Most of the time this loop is stalled with wfes (wait for events)". It might be useful to leave …
mfp20 updated
8 months ago
-
[Uploading STM32F1xx-master.zip…]()
I have a BTT SKR MINI E3 V2.0 board, which I want to use with grblHAL. Therefore I uncomment ```#define BOARD_BTT_SKR_MINI_E3_V20``` in ```my_machine.h```. The c…
-
Hi,
I have a issue with my QuadHD Tuner on Ubuntu 18.04 after 3 weeks of the Server being on i have a issue with Kodi and tvheadend saying No Signal on pretty much all of the channels some works an…
-
Hello guys,
I would like to ask for a support with my setup. The system is measuring Beehives weight , temp etc on regular bases. Hence I have set Wake alarm to 15mins minute_period, then I run a l…
-
A more precise way to perform delays should be implemented as this might mess with timing-sensitive protocols such as 1-Wire. Unfortunately I bricked my v4 and I'm away for a week so I can't really w…
-
No errors on install/refresh.
Ran sensors-detect and sensors, no errors, sensors shows temps/speeds/etc.
What logs/commands should I check?
Ran:
> zaggynl@openmediavault:~$ sudo sh -x /usr/share…
-
Hi,
I'm trying to get an i2c sensor (the BMP180 from Sparkfun) up and running for the past few days with the arduino environment. However, without any luck. On an arduino I get it up and running in …