-
**Use case:**
I am trying to scrape an endpoint with an API KEY аuthorization using Prometheus with json-exporter ( _prom/prometheus:main_ and _prometheuscommunity/json-exporter:v0.3.0_ docker images…
-
Hi,
The ESP32 SoC could be used for that purpose?
It has Wifi and BLE, and could download the list every day from a central location, and compare it with its log list.
That would avoid the re…
-
What do you think about the option to add the syslog.h to the project?
In such a case you could debug the device if it is not more connected via serial.
Updating via OTA is working fine - a log vi…
-
### Problem description
The Bosch Smart Home Thermostat II Supports heating and cooling in the Bosch Smart Home App. Unfortunately this switch between heating and cooling is not possible through ZH…
-
**Describe the bug**
The credentials used are information from environment variables
**Error traceback (If available):**
```
2023-11-17 19:25:36 - |ERROR| - [tb_device_mqtt.py] - tb_device_mqtt …
-
### Problem description
Unknown device
https://www.amazon.de/-/en/Thermostat-Programmable-Adjustable-Hysteresis-Compatible/dp/B0BZ8YYH3G
### Solution description
![tuya](https://github.com…
-
### Problem description
By default this dimmer module has a quite low range for dimming light (minimum brightness is quite high and brightness is roughly the same between 50% to 100%).
When paired…
-
### Problem description
When adding to ZHA only device exists, no entities.
### Solution description
Device is added with all related entities (sensor, switch). If possible add sensitivity co…
-
**Describe the issue**
Create description about your issue, and your actions to solve it.
I was following the example to create a custom serial connector.
I prepared config files as instructed and …
-
### Problem description
Hello,
When trying to add these zigbee dimmer modules via ZHA it does not add any entities, only the device.
### Solution description
Are you able to assist with support …