-
I have been trying for three days to get an esp32 and a wemo d1 connected via UART-TTL to the bms of my second power bank to work but I am not able to, let's see if someone can help me because I am de…
-
Release 5.6 does not have a listing for the Modbus protocol. I don't know when this removed or why, but I was hoping that this protocol would be progressed, especially the Master mode, which would all…
-
### Mission Statement
To revolutionize the residential renewable energy sector by developing an open standard architecture, APIs, and protocols, fostering innovation, accessibility, and sustainabilit…
-
Describe the bug
The esp32 UART rx FIFO threshold is fixed at 0x16 bytes, leading to premature end of frame detection and incorrect decoding of Modbus packets larger than 0x16 bytes.
When Modbus…
-
**Describe the feature**
Tag options for scaling values are currently limited to 3 methods (linear transform, ms to date, ms to time). There are situations where additional transforms must be done t…
-
Hi
When I run the example code, I get the following:
C:\Users\sidg\Documents\gotracer-master>go run abc.go
ArrayVoltage: 0.00
ArrayCurrent: 0.00
ArrayPower: 0.00
BatteryVoltage: 0.00
BatteryCurrent:…
-
Hi, I would like to follow up on the discussion in #30. @munseng-flexiv said that you'll release the gripper control interface in version 0.10 but I can't find anything about that in the release. Are …
-
can some one do a bluesun.yaml for bluesun inverter, all the .yaml file ive tested and all say disconnected
-
Hi,
I got **two** Victron inverters with Cerbo GX **in the same TCP LAN** network because I am running two _separate_ installations at my house.
Modbus-TCP is in both GX devices enabled, and I g…
-
Once a Thing is providing Forms with multiple protocols the `Thing::base` is less useful.
I'd suggest to consider
- Having a `Thing::protocol` defaulting to **https**. (profile overrides)
- Rest…