-
I'm ASSUMING because 6.1 is Main that this is the path of least resistance at HinTak Git.
I'm ASSUMING the latest Pi 5 + 64 OS has functional path to work because, all HinTak Issues are shut down and…
-
We need an actual program that utilises our libraries to interface with the MPU6050, INA260, and MD20, to drive our anti-quake cup holder. That is, read accel and gyro data from the MPU6050, calculate…
-
I tried to connect the board with inav configurator but I can connect it if I flash maximum 6.1.1 version, with 7 and 7.1 one I can't. I'm using usb port. After flashing 7.0+ firmware, the blue light …
Dex94 updated
4 months ago
-
请问气压计,磁场计(MS5611,HMC5883)是否必须挂载为MPU6050的从机,而不能挂载在I2C_0总线上??
我这边PCB把HMC5883挂载在总线上,一直报错HMC5883 DATA IS NOT READY
-
Hello Mr. Kris Winer
I have an issue with the filter updates that was bugging me for a few weeks now and I believe that you could provide me with a solution.
I started of by connecting 6 MPU925…
-
There are some cases when you write into serial without checkups. Like, here https://github.com/ElectronicCats/mpu6050/blob/3779bf6d4f0bbebb35b4de88c00129ae3a7598ec/src/MPU6050.cpp#L3306
If Serial is…
-
Hi sir,this project is great, i connect a gps moudule with gpio 17 and gpio 18, i put maps with (13 14 15 16 resolutions) into sd card.
I can get the gps location and display maps on the screen, i ca…
-
前段时间我研究了MPU9250的数据读取和九轴姿态解析算法,效果还不错,详情点[这里](https://imuncle.github.io/content.html?id=39)。
但是今天发现九轴算法得出来的角度有两个问题,一个是波动较大,一个是会出现下图所示的斜坡。
![image](https://user-images.githubusercontent.com/3598922…
-
after the other Wire/i2c issues have been closed ( #166 etc), and the speed got better, some I2C devices started working with the 101.
However, it's still far from _really_ working. Basically, in pra…
-
Hi Kris,
Thanks for the excellent resources you have made available for the MPU9250.
I'm trying get the MPU9250 to work on a custom board running FreeRTOS with a STM32F7x.
The driver I'm using…