-
john-jumbo is failing to build under 10.9.1
```
$ brew install john-jumbo
==> Downloading http://www.openwall.com/john/g/john-1.7.9.tar.bz2
Already downloaded: /Library/Caches/Homebrew/john-jumbo-1.7…
-
```
$ brew install john --jumbo
==> Downloading http://www.openwall.com/john/g/john-1.7.9.tar.bz2
Already downloaded: /Library/Caches/Homebrew/john-1.7.9.tar.bz2
==> Downloading patches
##############…
-
With branch `v3.0.x` (haven't tested `v3.1.x`), with the user `bob`/`hello` enabled as only change to the vanilla config, PEAP authentications will be performed using the `inner-tunnel` virtual server…
-
Hello!
Unfortunately i have a little problem. I got pom-ng installed correct. When i start it, it starts the webserver, when i try to connect via the web (or the console) pom gets a segfault and cras…
-
```
What steps will reproduce the problem?
1. Configure eduroam in your university.
2. After some time you can't connect anymore to the wifi.
What is the expected output? What do you see instead?
It …
-
FreeRADIUS 2.2.6 submitts the previously submitted user identity in the Authenticator Response message in EAP-MSCHAPv2 when using PEAP.
Correct behavior is to submit the host name.
The submitted serv…
sbren updated
9 years ago
-
```
What steps will reproduce the problem?
Try to connect to our wifi network at work which uses PEAP and MSCHAPv2.
What is the expected output? What do you see instead?
It doesn't connect. It says "…
-
```
What steps will reproduce the problem?
1. go to ACE , Select the config needed to be modified
2. Go to the Enterprise option, enter the EAP (as Peap), Phase 2 (as mschap2),
enter the identity and…
-
I'll have a look at doing the upgrade to SDK 1.5.0 over the next few days. Going by the release notes we might have a naming conflict with -lcrypto that will need to be resolved somehow.
-
Add support to connect with networks using 802.11X authentication (identity/password or key-based) like Eduroam or some ISPs' "free" hot-spots for their customers.
Example config for wpa_supplicant:
…