-
### Hardware:
Board: ?ESP32 DevkitV1
Core Installation/update date: ?1.0.4
IDE name: ?Arduino IDE 1.8.12
Flash Frequency: ?80Mhz?
PSRAM enabled: …
-
Need to fix up the port access, the interrupt, and the assembly but then you would have a board that had enough memory to drive the thing with some graphics.
-
It would be very useful if the SDU library could work with SAMD51 processors such as the ATSAMD51J19A. Is this possible?
S2Doc updated
4 years ago
-
Please implement SPI slave and I2C slave for the SAMD51 and SAMD21 boards. The SPI slave would benefit from being implemented using DMA, as well.
Thanks.
-
I cannot copmile the standard blink sketch with 1.5.7
I had previously been able to compile just fine with earlier versions. These are the error messages I get:
Arduino: 1.8.10 (Windows 8.1…
-
It would be "nice" if there was an easier way to assign functionality (UART/I2C/etc) to the unused SERCOMs on a board. Or even to repurpose in-use SERCOMs to some other function. (for example, the U…
-
Yesterday I took my Doppler out of the package, I wrote a very small program and uploaded it to the Doppler several times. It worked fine.
Today I added ICEClass.h and ice40.upload to the program t…
-
I was playing around in CircuitPython to work out the possible and best ways to detect if `os.urandom` is present. It turns out it's always present so I then started looking at the exceptions that it …
-
Don't know if this repo si still active I would like to know if it may be tollarated to change WIDTH define with LCD_WIDTH.
Related to https://github.com/MarlinFirmware/Marlin/issues/14904
I may…
-
Try different time with platformio....nothing to do.I receive this:
Processing STM32F103RC_btt_512K (platform: ststm32; board: genericSTM32F103RC; framework: arduino)
---------------------------…