-
```
If the stepper doesn't complete a full resolution or goes for long periods of
time between steps or steps over a long period of time, it gets really hot
due to a bug in the stepper code. It leav…
-
Can DMA be used?
-
### Bug Description
Example configs for bugfix-2.1.x all contain the following in Configuration.h
```
/**
* Add Z offset (M424 Z) that applies to all moves at the planner level.
* Thi…
-
SuperSlicer_2.2.53
Windows 10 64-bit
I'm running a custom I3 style machine on Klipper that uses a "false extruder" of sorts, where I run multiple materials through the same stepper motor. I unders…
-
https://github.com/INTI-CMNB/KiBot
-
I have a Chinese laser cutter with an AC motor like this that controls the up and down movement of the bed.
![](https://ae01.alicdn.com/kf/HTB1p1GAXAH0gK0jSZFNq6xMqXXa5/220V-AC-Synchronous-Gear-Mo…
-
I did the following.
1. Go home (i.e. the [0,0] position)
2. Enter values for a certain position and go there, like for instance [100,100]
3. Press "Go home" again.
It might be that it has something…
-
When I got to setup GRBL on my arduino Uno with the CNC shield that I got from your video (amazing tutorial btw, very easy to follow), Im able to flash mi-grbl to the arduino and change the configs no…
-
Hey guys, lately on my SKR V1.1 Pro board, I've been getting this strange `coil short circuit` error with my TMC2208 drivers (which are on my Extruder and Z axis). I've gone and checked the wiring and…
-
```
When the X or Y Axis is moved, the stepper motor for Z is not 'enabled' thus
it tends to drift when the X and or Y axis move.
All is OK for the X and Y Axis, when either one moves, the other is l…