-
Using current MSK bitfile, xsa, and PLUTO firmware build, AXI reads from MSK are working, but writes are not working.
Reads and writes to TX_DMAC scratch register are working.
Here's an exampl…
-
Hello, I followed everything you did in the blog post however apon launching srsENB it initialises the device and puts out a single spike on the transmitted frequency and spams the console.
I'm ru…
-
Hi
Having not found success in samples captured from pluto sdr ive found some samples here from a similar project, its captured with the same sdr as this project https://github.com/RUB-SysSec/DroneS…
pqoe updated
4 months ago
-
This is the HDL side of the discussion here: https://github.com/analogdevicesinc/libiio/issues/860
- _One 64-bit counter in axi-dmac, running on the sample clock. It would need to be readable from …
-
I worked with petalinux 2018.3.
Firstly I built successfully project when I added AD9361 drivers. (This project contain ad9361 hdl reference design from 2019R1 branch and meta-adi (2018_R2 branch).…
-
0. Could you send email to xianjun.jiao@ugent.be to introduce your self?
Done
**Issue description:**
Although, AP mode works great.
I observe a lot of bad-fcs messages in tcpdump when openwifi…
-
Hey all, I've been trying to disable Qt-dependent features of GNU Radio for a docker install and have had no success with `pybombs config`. I've reverted to editing the recipes before installing.
```…
-
- [x] Raspberry Pi OS (not buildroot since we'll want to use SDR softwares).
- [x] Check m2sdr_util info.
- [x] Check m2sdr_util dma_test (if not working or freezing, still continue testing the othe…
-
I know the internal AD chipset permits a second RX channel---how difficult would it be to add support for this second channel? I have a Pluto+ (Chinese variant) with dual receive, and I was hoping to …
-
On ADALM-PLUTO, with 2r2t mod, the dds_dual_tone() function sometimes generates a tone on the wrong channel.
With this code, it can be demonstrated on a dual-channel PLUTO with cables looping back …