-
For problem with the Beta firmware 22 August 2021: jump to the post below from sumerland
---
Original post but it turned out, Last OTA doesn't mean that the last time the sensor has been updated …
-
Hallo,
ich habe seit 14 Tagen das Problem, daß sich der Luftdatensensor keine Zeitdaten mehr von der Fritzbox holen kann. Der Sensor befindet sich von Anfang an im Gastwlan meiner Fritzbox und hat so…
-
I think the relation between sensor and user could be enhanced significantly if the sensor provides actual live information without referring to the map website.
This could be achived via RGB LED(s…
-
Meine InfluxDB ist mit Portforwarding öffentlich erreichbar über https.
Ich verwende die Option "https" in der Configuration (in einem Wiki hab ich gelesen das https nicht unterstützt wird, stimmt da…
-
Hallo und danke für das gelungene Projekt!
Ich hab mein Node 5635678 registriert, der DHT22 wird auch erkannt und die Daten werden ordentlich übermittelt.
Der sds011 springt zwar an, lüfter läuft…
-
Testing the beta software there are five entries for the BME 280 sensor.
Both pressure and temperature have two lines.
Please see picture below
![image](https://user-images.githubusercontent.co…
-
Hi,
Der Wert der Messübertragung lag bei mir ürsprünglich bei Werten um 2000 ms.
Seit ein paar Tagen liegt er bei 40 000 bis 60 000ms.
Konfiguration hier:
Über eine Repeater (TP-Link RE500 mi…
-
I sometimes would like to use the sensor as a mobile one, to check the PM in the other streets around my neighborhood.
I will be out of reach of my wifi so I need a local storage of the PM value so t…
-
Have a new station using SPS30.
On the measurments I get PM1&PM2.5&PM4&PM10 readings.
Issue is that the PM2.5 and PM10 readings are most of the time the same or only differ by 0,1µg/m³.
Only PM1 se…
-
### Category
Other
### Hardware
T-Echo
### Firmware Version
1.3.25
### Description
I'm using a T-ECHO and BME280 sensor and the firmware is 1.3.25a.
There is a problem that the BME280 sensor…