-
NO HELP HERE! GAVE THEM BUG ON SILVER PLATTER!
EASIER TO FIND ANOTHER BOARD THAN TALK TO THESE PEOPLE!
-
Hello,
I've been doing a project with the mlx90640 using an arduino nano 33 iot. I've noticed that refresh rates up to 1Hz work properly but starting from 2Hz, it tops of at 1.25Hz, whatever higher…
-
### Describe the problem
The Arduino IDE 2.x reliably identifies connected Arduino board and ports. It is possible to view the connected board in the GUI. However, if you remove the board and connect…
-
Hi,
How can I use other ports like port 7 & 8 for serial communication on arduino?
Very much like the SoftwareSerial C library.
-
# Serial Port Blocking on Nano 33 IoT
I'm finding that using WifiNINA on the Nano 33 IoT blocks the serial port for periods when in use. This stops messages being printed after Wifi events but it a…
-
### Describe the problem
The official [Arduino Serial Plotter protocol specification](https://github.com/arduino/Arduino/blob/master/build/shared/ArduinoSerialPlotterProtocol.md#serialplotter-proto…
-
**Is your enhancement proposal related to a problem? Please describe.**
So far there is only UART interface supported by [esp_at](https://github.com/zephyrproject-rtos/zephyr/tree/main/drivers/wifi/e…
-
I am using https://github.com/cotestatnt/AsyncTelegram2/blob/master/examples/lightBot/lightBot.ino to test my bot and everything works fine for few minutes, the led responds to my on/off commands, bu…
-
Issue is related to Arduino Nano Sense BLE and DS18B20 sensor (waterproof version) are not working together.
What I tried so far. I performed a test on UNO to isolate possible powering and sensor f…
-
### Discussed in https://github.com/lathoub/Arduino-BLE-MIDI/discussions/53
Originally posted by **agentff6600** March 23, 2022
Hi!
I updated to the new version today. I tried compile MidiB…