-
### Description
### Steps to reproduce
1. New firmware installed
2. click motion
3. click auto home
4. printer homes x and y
5. printer moves nozzle to center of bed and begins descend…
-
after 4 mks 35 with s base we have:
1) issue when you have Z max endstop and use bed leveling by 4 point from tft, when bed already at home and you choice any point, printer try move down anyway on 1…
-
I have a similar problem with the Neptune 3 pro... like the other issue reported with the 3 Plus
interestingly, the cfg file worked immediately on the sonic pad... when i used kiauh on the raspi …
-
Would it be possible to have access to the bed-leveling data?
(either like on klipper as a height-map image or just the raw height-data in a spreadsheet)
I would really like to see if/when/how much …
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
When homing any axis, there is a brief pause of approximately 1.3 seconds before any mo…
-
To start off, I've built a few ender 3's with ABL and even had this exact printer up and running beautifully until my first SKR mini E3 decided to start giving the TMC connection error on the X axis. …
-
I think there are 2 Bugs in the Artisan Firmware when it comes to auto-leveling:
**Problem 1**: It feels like the auto bed leveling does not take different zones into account. Or is not working at …
mmack updated
3 months ago
-
### Is your feature request related to a problem? Please describe.
I always have to redo the ABL if for some reason it misfires, i.e. there is a big cavern in the middle of the bed.
### Describe the…
-
**Printer type** - XL
**Printer firmware version** - 5.1.2
**Original or Custom firmware** - Original
**USB drive or USB/Octoprint**
USB
**Describe the bug**
Nozzle cleaning (the tap…
-
There is a problem with auto bed leveling when using the BLTouch.
The problem is that the print head goes into position, but the BLTouch repeatedly just pulls the pin in and out. On the Z-axis the po…