-
Use M5.Axp.SetCHGCurrent(AXP192::kCHG_1320mA); for 1320mA charging on the USB-C connector.
-
My tracker does work but has a small issue with the displayed battery voltage
It's a Lilygo T-Beam V1.1 LORA32 it does have an onboard 18650 battery.
a) when running from the onboard 18650 battery…
-
hello, I received a T-BEAM 1.2 - AXP2101 (instead of an AXP192), I installed RDZ but the T-BEAM has a strange behavior, scan that panics, no probe decoding even at 1m distance, crashes, screen freezes…
-
... with t-beam Rev1.
My T_BEAM_V10 is defined in the configuration.h , the RX and TX of the GPS is set right.
The blue GPS-LED blinks, even the t-beam is switched off!
I searched GPS for hours. …
-
Hi Ricardo,
I've loaded your latest version (31.12) and it works.
But you should add the backup battery charging, otherwise this battery quickly goes flat and then, the GPS fix can be VERY looong.
…
tk5ep updated
6 months ago
-
I finally got 915Mhz to work on my TBeam v1.1
I had to modify/change the platformio.ini to use the SX1276
Can you make this change permanent in future builds?
 and the issue is not addressed there.
- [X] I have updated…
-
Good day,
I would like to keep using the power button on / off functionality, and also use the button to i.e. turn on an oled screen. Per example 4s press to turn off, 2s press to turn on, and shor…
-
Hi, is there any chance to use a free IO-Port to power on/off the board (Lilygo T-Beam v1.2 with AXP2101)?
I'd like to use other buttons in a housing.
73 de Thomas, DO4FT
-
20:48:50.186 -> AXP2101 Started Successful.
20:48:50.186 -> DCDC1 :ENABLE Voltage:3100 mV
20:48:50.218 -> DCDC3 :DISABLE Voltage:3300 mV
20:48:50.218 -> ALDO1 :DISABLE Voltage:3300 mV
…