-
Anyone tested the new "**SKR E3 Turbo**" board from BTT/Biqu on stock Creality CR-10 or stock Creality CR-10S 3D-printer?
https://github.com/bigtreetech/BIGTREETECH-SKR-E3-Turbo
https://www.biq…
Hedda updated
3 years ago
-
**Is your feature request related to a problem? Please describe.**
It is a bit time consuming to locate previous file/firmware versions.
**Describe the solution you'd like**
Add a tag with each …
-
I am encountering an issue using the U8g2 library with a BigTreeTech TFT35 3.0 display that emulates a ST7920. While this setup functioned without problems in Marlin 2.x, U8g2 appears to have difficul…
-
Recently i bought the BTT SKR E3 mini V3 and a BTT mini 12864 V2.0 display
[https://github.com/bigtreetech/MINI-12864/tree/master/mini12864_v2.0](BTT mini 12864 V2.0). Not the best decision, but don…
-
I have hybrid stepper and ı dont know how ı ll drive this motor
![image](https://user-images.githubusercontent.com/56602850/67092719-9f46bb00-f1b8-11e9-804b-3a235fb5b9c4.jpg)
-
https://github.com/bigtreetech/BIGTREETECH-S42B-V1.0
https://github.com/bigtreetech/BIGTREETECH-S42A-V1.0
Quas7 updated
3 years ago
-
there is a mosfet U1 on the board product page
https://biqu.equipment/collections/expansion-board/products/btt-rrf-wifi-v1-0-module-driver-expansion-module-for-skr-v1-4-1-4-turbo-skr-v1-3-3d-printer-…
ag88 updated
7 months ago
-
### Description
During a print using Klipper firmware the print stops and an error is raised saying:
```
MCU 'mcu' shutdown: Rescheduled timer in the past
This generally occurs when the micro-…
-
Dear bigtreetech team
I have a suggestions: could you fork marlin directly into a new git repo, so we could easy compare the changes done in marlin and the changes you did to make it work on the sk…
-
Hey there!
First off, thanks for putting this out there @fryc88! Long story short, I was going to Klipperize my Sovol SV01 Pro, but hit an issue on the last print that I did before that. The part…