-
```
What steps will reproduce the problem?
1.listen the fm radio for a few minutes
2.the radio stop playing and the app stops responding
3.
What is the expected output? What do you see instead?
Wha…
-
Hi,
When I try to compile this on a BBB, I get the following error:
```
root@beaglebone:~/rtl8723bu# make
make ARCH=arm CROSS_COMPILE= -C /lib/modules/3.8.13-bone79/build M=/root/rtl8723bu modules…
mogar updated
8 years ago
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
1. One case of slip in X-Axis. Plan to reduce micro-stepping in hardware and firmware. Reduced micro-stepping to 1:8. Still had one slip. -- This might be because of insufficient strength of build-…
-
The script does not work when OWE with transition mode is enabled. If OWE is enabled there will be two entries in `hostapd-phy0.conf`:
```
root@Felix:/tmp/run# cat hostapd-phy0.conf
driver=nl80211…
-
> Datasheet errata will be added to this issue when found. Datasheets will be updated with the listed version after items are checked off. Some errata may persist between revisions, and they will be…
-
I tried this https://github.com/esp-rs/esp-ieee802154/blob/b7450029e492a36a36a77aad9f96327618cc6ed8/esp-ieee802154-examples/examples/receive_all_frames.rs yesterday and it worked, now all I get is
…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hello,
I've build the driver for ARM6 (RasberryPi B) using kernel version 4.4.8. The driver builds and I can install with modprobe -v 8732bu. A wlan0 interface is created after the driver loads.
I w…
-
Hi,
im having strange crash, which is caused during blufi app connection.
```
home/osboxes/esp/esp-idf/components/freertos/queue.c:1442 (xQueueGenericReceive)- assert failed!
abort() was called a…