-
**IMPORTANT**
Check the Wiki, developer's guide or ask the community on Slack before submitting a new ticket. You might find a solution to your issue there.
Also, please make use of [markdown](h…
-
As the pinout diagram resource is external to GitHub, but relevant to both this repository and https://github.com/HelTecAutomation/HeltecDocs, I add it as an issue here.
The [HTCC-AB02 pinout diag…
-
Currently all platformio environments are defined in the single main INI file `platformio.ini`
While the current approach works and is well structured inside that INI file, it will become difficult t…
-
**Hardware:**
Board: Heltec ESP32 WiFi Lora Board Core
Installation/update date: 25/nov/2017
IDE name: Arduino IDE
Flash Frequency: 80Mhz
Upload Speed: 921600
**Description:**
I want to …
rmh78 updated
6 months ago
-
This was previously detailed in the forum.
The issue: I am seeing a user payload whose size is greater than allowed by the currently defined data rate, DR_, that is still being delivered to the ne…
-
Using the LoRaWAN_End_Device_Reference.ino the CubeCell 2 can initialize the Device but return error -6 most times.
In TTN I see the join process without errors.
Tried to skip the error in sketch,…
-
Hello, I'm trying to use low power library with periodically wakeup in conjuction with Radiolib library for lorawan transmissions but it's not working.
If I use LP library just with blink example I …
-
## Environment
- Development Kit: ESP32-S3-DevKitC-1
- Kit version DevKitC: v1
- Module or chip used: ESP32-S3-WROOM-1
- IDF version: v4.4
- Build System: idf.py
- Compiler version: (crossto…
-
**Sketch that is causing the module fail**
```c++
/*
RadioLib SX126x Ping-Pong Example
For default module settings, see the wiki page
https://github.com/jgromes/RadioLib/wiki/Default…
-
I'm trying to run default examples without changing nothing, but i've got some errors.
How i can resolve?
Thanks
```
C:\Users\o.dimanno\Documents\Arduino\libraries\ESP32_LoRaWAN-master\src\reg…