-
This is the code: (pretty much the readme example, modified slightly for embassy)
```
#![no_std]
#![no_main]
#![feature(type_alias_impl_trait)]
use embassy_executor::Spawner;
use embassy_rp::g…
-
I just want to read temperature from a DS18B20. If possible, I would prefer using avr-hal to interface with the board with this crate to interpret the readouts. Intuitively, I would start with this ex…
-
Hi I just performed the mod on a t962-a with an Lpc2134 and socketed thermocouples. I’m running 0.5.2. I have a couple of issues.
My ds18b20 appears to register too hot so I tested it with ice …
-
A suggestion, pass the sensor ID. You can do it very easily by editing 98-ds18b20.js and between the lines:
`
var msg = { payload: value };
node.send(msg);
`
add a new l…
-
Hi, I can't put this module into operation on several thermometers connected separately to different Gpio. The system sees them, but I don't know how to modify the module to read them. For example, …
-
Hello are you able to add a Temp compensation for HX711 Plugin?
Problem is that with changes in room temperature my scale shows different values. It would be nice to have a solution for it like Com…
-
I have Arduino circuits that use the Dallas DS18B20 18B20 Temperature Sensor. It would be helpful to be able to add this to my schematic. Thanks.
-
in the new broadcastd.c line 87
struct sensor_reading\* result = read_ds18b20(0);
should it be:
struct sensor_reading\* result = read_ds18b20();
Sorry - I dont know git enough to do a pull
Tony
-
The try-catch block in function temperature() covers its callback. This way the library catches all exceptions thrown in the callback, even unrelated ones from applications using the library, and caus…
-
### Description
I am currently working with ESP32-S2FN4R2 on a LOLIN S2 PICO board.
I am using OneWire library to connect DS18B20 (with Rob Tillaart DS18B20 library)... not very original !
…