-
I have followed the directions to install a custom driver but it will not install.
At this point I would gladly contract out this work.
I am trying to build a custom tuntap driver. I followed the …
-
Trying to install npcap 0.9983 on Windows 10.
```
C:\Program Files\Npcap>NPFInstall.exe -u
Npcap LWF driver has failed to be uninstalled.
C:\Program Files\Npcap>NPFInstall.exe -i
Unknown erro…
-
Creating a virtual display with xrandr that can be broadcasted as an extra monitor is fairly easy on Linux. I think that this method should be implemented as a guide as it is a viable method for Linux…
-
I have a 1080p 144hz ASUS VG248QE monitor connected to my desktop's graphics card (AMD RX 580). I was able to get ddcutil working with a DisplayPort cable but not DVI-D (using dual link to take advant…
-
After a lot of manual tweaking, I am able to log into the VM with Moonlight & Sunshine. However, the Nvidia Control Panel reports that the vGPU is connected over DVI, which limits the resolutions and …
-
I'm testing 8bits per pixel (RGB332) in a 640x240 buffer mode using DVI_SYMBOLS_PER_WORD=1
`uint8_t framebuf[FRAME_HEIGHT][FRAME_WIDTH];`
```
in core 1 main I'm running the dvi
void __not_in_f…
-
So using the VX1000 module I’ve found that the change input commands work on the UHD Jr. I’d love if someone could implement these into the UHD module.
So on the vx1000 module
layer 1-hdmi 1 c…
-
* Create a "Advanced Compatibilty Settings" submenu
* Move "CIA: Use 8521 (C64C)" to it
* Add settings for the VIC-II as tagged with `@TODO sy2002` in `fpga_sid_iec.vhd`, particularly 656x/NMOS, 856…
-
```
$ tex \\relax a\\end % => "texput.dvi" is written
$ dviasm texput.dvi >texput.dump
$ dviasm texput.dump -o texput.dump.dvi
```
The resulting "texput.dump.dvi" seem…
-
Hi. When I installed Manim, I first tried to render an animation to see if it works. I first issued the command below to render the _Square to Circle_ example, and it did well.
`python3 ./manim.py ex…