-
# Hosting/Rehosting Request for "Computer Organisation and Architecture Virtual Lab" IIT Kharagpur
## Lab Name: Computer Organisation and Architecture Lab
## Discipline name: Computer Science Engi…
-
Hello,
first thanks for open-sourced your work. But you have only open-sourced the code,
PCBA design, electronics BOM, some tutorials and some notes but you forgotten
the documentation for connec…
-
Brushless DC fans contain sensitive driver electronics which are not designed to stand up to a high frequency square wave input. The fan output should have an additional MOSFET and a capacitor to make…
-
### Issue description
I couldn't see this mentioned elsewhere, or couldn't see a decent answer.
I've noticed that If I first design a layout using Planner mode, then selectively build certain parts,…
-
Found your library and it can be a great tool to design mockups of character displays for documentation of electronics with HID interfaces.
https://learn.adafruit.com/monochrome-oled-breakouts
O…
ghost updated
2 years ago
-
If I understand well, this repository contains the full firmware of the blackmagic debug probe, is this correct? So, the firmware of the blackmagic debug probe is then open source if I understand well…
-
Length of base plate = 31cm
Assuming this part will be 3D printed, what is the max supported object size, what is the usable printing area size?
What are the fabrication limitations of 3D printe…
-
"A voltage regulator is integrated inside the machine to provide power stability.
![image](https://github.com/user-attachments/assets/773ac95f-9529-44cf-803a-b5e855610931)
This particular model …
-
It would be quite helpful if the electronics enclosure on the 300ZL was larger. There seems to be ample real estate to do it and I'm not sure of any compelling reason not to.
Doing so would allow …
-
> @UofTAgritech/mechanical
**Completion is tracked in the linked PR.**
## Design Scope
Design a system to decrease the air water vapour content of the internal environment.
### Purpose
…