-
Hello author, I read your paper on DAG, which is a very excellent research. I would like to ask about the experiment of using DRAM with DPU-v2. Since the crossbar (64 x 64 x 32) is difficult to implem…
-
bcrypt with OWASP cost=10 parameter takes 5.7 seconds to run.
10 is the current recco; however, we are using cost=7 for a reasonable UX delay on password entry (0.8s).
This is a reminder to fig…
-
Hi @michaelgmcintyre ,
While trying to implement this project in Vivado, we found some syntax errors and some ports which were wrongly declared, like in file:
- [ ] https://github.com/opencomputepro…
-
Hello,
I am afraid that we are doing the exactly the same thing.
https://github.com/Nic30/hwt
https://github.com/Nic30/hwtLib/blob/master/hwtLib/samples/showcase0.py
This library is also S…
Nic30 updated
5 years ago
-
Let's discuss my approach to random math in Cryptonight. You can post test results in this thread: https://github.com/SChernykh/CryptonightR/issues/2
Basic algorithm description:
- https://github.…
-
after installing pynq networking i am unable to access pynq via browser.
is this due to changes made by pynq networking to the eth0 file in interfaces.d??
and i also don't have old backup up file.
-
Currently we need to break up a move to straight into small movements and each of those has a trapezoidal speed profile.
If we wanted true control of the speed and position while moving in a strai…
-
Create an initial design document describing a FaceDancer backend for LUNA.
This should:
- [x] Include plans for the core backend.
- [ ] Accommodate future FPGA acceleration, where possible.
…
-
# Create Dexter robot_description #
Using URDF provided in #97.
# Create ROS controllers (action servers) for Moveit #
Using ros_control framework like [this](https://github.com/PickNikRobotics/r…
-
If we know the stepper angle (meaning the angle the stepper motor has been told to go), as well as the actually measured angle #12 and there is little to no mechanical backlash #7 then we can accurate…