-
Seems like our team takes longer than others to start teleop mode. What can we do to shorten TeleOp intiialization?
On review of the log file (see comment below), this looks like the cause. All th…
-
Disclaimer: My perspective on this is that of an FLL Coach. While I'll admit to a bit of tinkering with an EV3, 99% of my effort in this space is through the work of the 30+ FLL teams I have coached…
-
My android phone has version 10, and seems have stability in WIFI direct when running FTC robot controller.
Sometimes the network info shows "unavailable", and I cannot connect to WIFI direct.
I …
-
**Firstly**, many thanks to all the contributors of gm0.
The [VEX 393 EDR](https://gm0.org/en/latest/docs/power-and-electronics/servo-guide/specialty-servos.html?highlight=393#vex-393-edr) section …
-
I've tried this using wait commands and with just a regular command with isFinished always set to false. Here is an example of a code that would cause this error
```
val driver =
Wa…
-
The lint error that was in 5.5 is still here in 6.0
See: https://github.com/FIRST-Tech-Challenge/SkyStone/issues/262
-
Can anyone explain what exactly `Trajectory.velocity()` returns and how to use it properly?
I am trying to get the robots velocity at a specific point in the trajectory. Right now, I am simply doin…
-
First, thanks for this tool. We have been using it heavily this past offseason.
Issue: After updating to the latest libraries released for Freight Frenzy, pushing updated source files doesn't seem…
-
The Driver Hub from REV is at Driver Station 6.2.2
This builds a robot controller to version 6.2
So the Driver Hub gives a warning that the two don't match. I am concerned about the students l…
-
There's a new Rev LED and corresponding function in blocks 6.2. Problem is -- it doesn't work.
The cable and LEDs themselves are fine and they work fine when defined as digital devices.
REV folks co…