-
Hi
I wanted to try the new usb to can bridge mode (https://www.klipper3d.org/CANBUS.html#usb-to-can-bus-bridge-mode) with my Spider 1.1 (with attached CAN transceiver) but only got USB errors on th…
-
i have 2 board spider 1.1
One of this work well but other don't work.
My board has many problems:
1. When i flash usb firmware . Pi not recorgnize.
2. When i flash uart mod. Pi can connect it. B…
-
Hi all i have problem and i dont know if it is software related or hardware... I hope you can help me out.
Recently i bought MKS Gen L v1.0 board with 5 TMC2209 drivers for a cheap. Problem is i cant…
-
I installed the latest marling bugfix 2.0.x firmware, made all the necesary modifications to config and config_adv, just testing the board with the steppers, nothing else. sending m122 gives this resp…
-
The 120 ohm terminating resistor is missing on the actual PCB.
See JP3 and R18 on the shematics.
![grafik](https://github.com/FYSETC/FYSETC_SB_CAN_TOOLHEAD/assets/123958845/3254cb0a-2404-49f1-83…
-
FYSETC S6 is proving a great board for klipper. and in conjunction with a RPI Z2 and Fluid/Mainsail is almost a perfect setup for most people to use or upgrade to.
the only issue thing that stops m…
-
The link to the fusion 3d model is bad
-
Hi,
I have installed all the drivers and the display is running in portrait mode, but when I try to run ctp40-rotate, I get the reply:
This rotate utility only works with the Raspberry PI OS desktop…
-
Hello, I have a BTT SKR2 board and Fysetc TMC2209 v3.0 drivers. The board has Marlin firmware loaded (I've tested on several versions, and same error) to work with the rev b model board and F429 ch…
-
hello
I´m having some issues downloading the files, well, actually I can´t download them, it just opens the raw code.
can you solve this please?
or send them directly to my email?
thnak you so m…