-
CPU:
* C1 left to VCC
Memory:
* IC 3 GND (upper left), VCC
* V1 VCC (10)
* V2 GND (8)
* C5 VCC (left)
* C6 VCC and GND
SerialCF:
* R1 left to VCC (16c550)
* C4 left to R6 left (VCC)
-
Hi @elupus
Recently I have been playing around with ESP and RS485 (MAX485). After a lot of researching I got it working well, but it might be useful for other users to mention:
- If you want to…
-
Für sbBB soll ein Test-Index und eine Oberfläche aufgesetzt werden mit den Anpassungen aus dem Branch https://github.com/swissbib/content2SearchDocs/tree/gndEnhancementBasedOnSolr6Branch.
Die AG sb…
-
Can you show a photo of which pins are ACC 12V and GND?
-
1st of all, thanks a lot for the class and examples, it saves a lot of time!!
As I've seen in the code, it's not possible to connect EN to GND, and if one doesn't want to disable the multiplexer (h…
-
### Description
- **Goal**: For representing "ENUMs" in semantic metadata models, it would be **preferable use URIs from existing (controlled) vocabularies**
- **References**: To aid in the discover…
-
`rdfproxy.ModelBindingsMapper` should run general sanity checks on models.
E.g. an error should be raised / a warning should be emitted if
- [ ] a model defines `group_by` but doesn't specify a…
-
Add a StorageService that handles all requests to Storages (GND, PageNotFound)
-
I tried to install the deauther 2.6.1 on few esp8266 devices. Unfortunately the buttons are not operational at all. There are two Nodemcu 8266 v1 where the display (I2C) and everything else is workin…
-
@ramapcsx2
Based on your images below I've traced the following connections out, I just want to confirm they look correct to you before I get to soldering.
Also I assume other than this wiring …