-
![resdet](https://user-images.githubusercontent.com/7695323/28793308-e41e2906-7632-11e7-8850-088678035d66.PNG)
Upon issueing the "reset" command, it will always happen that Smoothieware closes the …
ghost updated
6 years ago
-
Portlister should check if there is already an open connection, if yes, it should not autoconnect.
Note: It's the same printer, so no real problem, however it may cause confusion in the logs.
```2…
Kunsi updated
7 years ago
-
I am using the files in the DLC-Laser.rar but when i choose arduino/genuino UNO board in IDE 1.8.2 the compile fails with the following errors, i need to complile a version that doesn not try and home…
-
Flashed the firmware: https://github.com/bdring/Grbl_Esp32
Can connect over wifi and move the CNC on all the axies
Cloned the latest bCNC source, installed `sudo pip3 install .`, started `python3 …
-
Hi all pro,
I am new in CNC. I have connected mega + ramps + tb6600 as enclosed photo.
![Screenshot_20191003-201723_Gallery](https://user-images.githubusercontent.com/56119175/66129864-e9f20000-e6…
-
Hi,
I am working on a research project related to the fuzzing of embedded firmware. Currently, we are generating a benchmark for evaluating the current state-of-the-art fuzzing mechanisms. The aim of…
-
Hi Did anyone know were i can find the firmware for the ardoino ?
there is nothing ! did i have to write it by myself ( im not a programmer so unpossible)
BR
Thomas
-
### Version
2.1.6
### Hardware / Firmware
GRBL 1.1
### What happened
Take any design with more than one design object. Try to change the start depth, target depth, or cut type and it won't stick.…
-
The stepper motor module provides an I2C interface to GRBL. The '$$' command is supposed to return all the settings, but all I am getting is:
$$
$0mnoing seek, mm/min)
$21=100 (homing debounce…
-
### Version
2.0.11
### Hardware / Firmware
GRBL 1.1
### What happened
In the visualiser, the default colour for rapids is too similar to the grey gridlines. Can I suggest changing it to #FF00FF ?…