-
this problem just started. I have a large format printer that I switched over to a .60 nozzle to print some 420x420x100 prints @ 230°, prior to that I had no problems printing with a .40 nozzle @ 210°…
-
To be aware of high load of electrical heater such as heat pump or MyPV heaters etc it would be great to have a heater device in dbus like ev charger but in combination with temperature values (of wat…
-
**Is your feature request related to a problem? Please describe.**
Heater power is in percent would be nice to translate percentage to Watts.
**Describe the solution you'd like**
Heater power in …
-
I am having this "Heater decoupled" very often.
Using Repetier-Firmware v0.92.9
Tried to print 3 times right now. The temperatures graphs are just fine. And suddenly I have this _Heater decoupled_…
-
I'm using a 12v silicone pad heater with MOSFET using non inverted device. This heats the pad to 100C when heating.
Is there option to set power level via pwm to 30% would be ideal.
-
https://parts.rheem.com/product/RPD-EEWRA631GWH
Have a gas water heater, econet doesn't have a RJ11 instead just a 3 wire connection, guessing power+ground+data/1wire.
-
**New bug checklist**
- [✅ ] I updated the iOS openHAB app to the latest [TestFlight](https://testflight.apple.com/join/563WBakc) version.
- [✅ ] I read the [Contribution Guidelines](https://githu…
-
I posted this here https://github.com/makerbase-mks/MKS-RUMBA32/issues/26 but have gotten no response so I'm hoping someone here will have an answer for finding a replacement mosfet for HE0...or if t…
-
The following code contains a bug, where signals reference each other in a sort of non-deterministic infinite loop. Currently, IVerilog stalls during the `vvp` execution stage. I believe that it shoul…
-
It would be convenient to have the powers going to the two (or even three) LS372 heaters being automatically logged / in the data files somewhere.