-
I have recently purchase a Goldair Heater and started using this component (thanks for the great work). The heater has been blocked on my firewall from the internet to remove cloud connectivity and we…
-
I'm encountering an `MCU Protocol Error` when adding custom configuration sections to my Klipper configuration file. The specific error I receive is:
MCU Protocol error
This is frequently caus…
-
Hey :)
I would like to thank you for your work !
I am using shelly 2.5 devices in switch mode to control and measure the power used by electric radiators/heaters.
By controlling a radiator/heater…
-
Thank you for the work on the library.
I plan to integrate my aeroflow heaters with iobroker and that looking for libraries which have been working on the integration.
Found yours and seen it has …
-
### The problem
I’ve recently connected a Tuya smart switch rated at 30 amps to control the water heater. I’ve integrated into Home Assistant using the official Tuya app.
I’ve noticed that the curr…
-
Bit of a long shot, how does this control the way Alexa sees the relay is on?
I'm using this fine with a relay which pulses a 12v diesel heater switch.
The relay is connected on the back of the …
-
I just started using ShellyPy to control my hot water heater. I need to add temperature sensing to managing the solar heat exchanger. I have purchased a Shelly Plus Add-On to add to the Shelly Plus …
-
I use this to create a temperature-controlled heater using a dumb electric heater connected to a smart switch and a temp sensor to close the loop. I do this with a HomeKit automation that runs every m…
-
We have doubts about where to connect the cables we received because they are too large to connect to the PCB.
1. Are the screws in the image for the edge of the PCB or for the screen?
2. If they a…
-
### The problem
In the "Operation" section, the mode "Off" is listed twice, and there is no option to switch the Water Heater to Vacation Mode.
![image](https://user-images.githubusercontent.com/513…