-
Hallo Leute,
Habe leider das Problem dass ich bei der Installation nicht weiter komme bin nach der Anleitung hier gegangen habe allerdings allerdings andere pfade zb. bei mir liegen die xml datein …
-
Originally reported by: `jireh360` (SVN username)
Originally assigned to: `jireh360` (SVN username)
Transfered Version: `CBECC 2022`
Transfered Priority: `Medium`
Transfered Status: `New`
We see that…
-
Please add support for Heat Pump Wi-Fi Controller ( type C3 ). It's very popular, sold under different brands.
Thanks a lot.
-
While modelling Scandinavian heating systems, typically comprising both water and ventilation systems in the same building, we’re missing the possibility to add an Equipment representing the physical …
-
The NSPanel's temperature sensor is quite noisy and picks up temperature increases from the active display.
However, these issues can probably be tackled:
- the temperature noise can possibly be r…
gon0 updated
7 months ago
-
The supply air temperature needs to be inferred based on the type of equipment that is present in a zone.
1. Discuss in this thread the proposed logic
2. Create an implementation design in the co…
-
### The problem
As of writing, there seems to be an issue with the cloud servers of Mitsubishi, making it impossible to control HVAC systems for a few countries in the EU at least via the official ap…
-
When the printer is still cold and you start a print it takes quite a while before it starts printing. Showing very clear feedback that the printer is busy heating might take away some confusion.
We…
-
As this is a living database, new (primary and secondary) data attributes can be added in the future. During the manuscript review process the following were suggested.
1. heating system, as this …
-