-
Hello,
I took the plunge (after much hesitation regarding _self-inflicted wounds_) and true to form ran into an issue immediately with the **2.4" TFT HAT** on UNO R3.
I uploaded the **drawBitmap…
-
Im using ST7793 Driver ic for open-smart uno r3 air and 3.5"tft .
This code should control the display, but unfortunately it doesn't work. No reaction, it's all white. What could be the problem ?
…
-
Hello SDrive Max enthusiastics,
I just downloaded and program ATMega328P with Corona release of SDrive Max with LCD ILI9325. Touch screen during EEPROM writing is detected ... "Detecting touchscreen.…
-
hi, i trying to connect the blue pill (stm32f104 )-
2.4 inch tft - ILI9341-8 bit Parallel mode but no output in display .
i am trying use display module as Only Display NO touch requirement at thi…
-
I have several 3.5 inch MCUFRIEND touch Screens with the Red Board and are labeled "www.mcufriend.com 3.5" TFT LCD for arduino uno". Using this library the Red board touchscreens work on the Due and t…
-
I'm having trouble with a 9486 display. The display works using the library on a Due, but won't have any of it on a bluepill. My 2.4" display works fine on both.
The diagnose support sketch just re…
-
hi notro, i am trying to use spi interface with 16 bit parallel interface ili9325.but i get fail.please help me
-
Hi. David
I use your library in standard configuration with Teensy3.1 and R61059 it works well.
LCD 3inch 240x400 R61059V ----- Teensy
RST-A4
CS --A3
RS --A2
WR--A1
RD--A0
DO--8
D1--9
D2--2
…
jox1a updated
3 years ago
-
HI, great looking library, thnx! I'm having trouble at the very fist hurdle . . . none of the example sketches will compile for ESP32 Dev Module (or any board that I select)
Arduino IDE 1.8.12
ESP…
-
Diagnose whether this controller is supported
There are FAQs in extras/mcufriend_how_to.txt
tft.readID() finds: ID = 0x6090
MCUFRIEND_kbv version: 2.9.9
This ID is not supported
look up I…