-
This issue was actually caused by interference from OptiTrack motion capture sensors in the same space as the L515. Turning them off and the L515 data is fixed. This does not vary with C…
-
**Describe the bug**
Since updating to 0.3.2 my HMS-400W-1T hasn't reported any data anymore. It shows up as connected, but all other sensors and diagnostics have gone to unknown for both the DTU and…
-
**Checklist:**
- [x ] I updated to the latest version available
- [x ] I cleared the cache of my browser
**Release with the issue:**
Compass-Card 2.0.0 / HomeAssistant 2024.8 and 2024.9
**L…
-
### Describe the bug
Incorrect behaviour yesterday (24/11/24) with the accumulative off peak usage tracker (kWh). It "jumped up" incorrectly to follow the total accumulative usage during the 7-9am…
-
### The problem
Some sensor enities have been changed to buttons in the Z-Wave intergration
Currently, I see this with the according devices:
Carbon monoxide FireAngel
Heat Detector FireAngel
…
-
As requested on the telegram group:
I have installed Bliss OS on my device. However I enountered to problems.
- the orientation sensor works upside down. Both horizontally and vertically. It works in …
-
### The problem
Trying to update to 2024.11.0, but just spins and returns to 'update available', when checking logs, I found this:
Logger: homeassistant.core
Source: core.py:551
First occurred: …
-
Hello,
I have just configured light sensor trigger, proximity trigger and MQTT integration on NSPanelTools but I am unable to get light sensor to trigger in Home Assistant despite responsive in NSP…
-
**Context**
Usually external monitoring data is sent by an installer or sensor with a new DID. Technically, `ref` variable becomes the DID of the new device.
In metered energy policy, there is a…
-
_Discussed with @jakimowb._
Individual raster layers are currently managed in the _Data Sources_ panel under the _Rasters_ node. This works fine for already prepared reflectance data, like a Landsa…