-
Build: Latest build of qGroundControl available on website.
FC: FuriousFPV F35 - Inav 1.9.1
Receiver connection: Crossfire full module tx, micro receiver
Connection to FC: Bluetooth via cross…
wx4cb updated
3 years ago
-
In gyroflow 0.3 I converted INAV v3.0.2 blackbox files *.TXT with the tool blackbox-decode to *.csv and gyroflow could import those csv files. In gyroflow v1.0.0 there is an error message when I try t…
-
https://github.com/PX4/Firmware/blob/master/src/modules/position_estimator_inav/inertial_filter.c
-
Hi, unfortunately iNAV doesn't run in my distro of choice out of the box. The issue is that iNAV ships as a dynamically linked binary, without some of the needed so files. While doing so is very commo…
-
## Current Behavior
Using a RC Link system like [mLRS ](https://github.com/olliw42/mLRS) that support RC over MSP, there is currently no way to get receiver and link information to the OSD and for bl…
-
Please help me with firmware for [F405 NOXE]
-
JHEMCU GF16 F405 Flight Controller
Purchased a GF-16. INAV firmware version 5.0.0. I'm setting it up for now. There is a problem with OSD! The OSD works and is configured using the transmitters knobs…
-
Hi! I can't set up OSD and Mixer in INAV 5.0.0. Flight controller GSF405A.
Firmware https://github.com/jhemcu/FC-ESC-Firmware/blob/main/GSF405A/inav_5.0.0_JHEMCUF405.rar
Help me please. )
-
Hi everyone,
I’m working on configuring an iNav-based flight controller for my drone and aiming to control its movement using a Raspberry Pi with the pymavlink library. I’ve already connected the R…
-
Hi, OliverC!
Could you add support of Ardupilot?
I mean to make possible to connect your ESP32-INAV-Radar to a FC which is controlled by Ardupilot?
Best regards :)