-
Hi, I have an Uniview camera with Hi3516DV300, CMOS sensor is [SmartSens SC4210](https://smartsens.oss-cn-beijing.aliyuncs.com/web/products/SC4210_V4.0.pdf). It has 2GB memory and 8GB onboard EMMC st…
-
Hi, first I want to thank you for this wonderful project. I have a camera with 3516CV300 and a 1/1.8" Sony sensor IMX385. I have manged to install OpenIPC to the camera successfully, but only to find …
-
Установил прошивку на камеру чере веб
Модель камеры 000529E9
При включеном watchdog иде постоянная перезагрузка каждую минуту. После отключения бюольше не перезагружается.
Не работает видео pre…
-
Hi, so this is the new camera with Hi3516AV200, IMX385, 1GB memory and 32MB flash. I flashed the newest OpenIPC image, it can boot into system without any problem, but without network access
dmesg …
-
Just for information.
I bought this ESCAM "button" Q6. It uses 22.x.x.x series of the same style of firmware. The SoC is a GOKE Electronics GK7102. My plan is to enable telnetd and reconfigure vide…
-
Hi, i tried to compile the project to different supported hardwares, however i always recevie an error:
/home/schnee/Workspace/openipc-2.1/output/per-package/ipctool/host/bin/../lib/gcc/arm-openipc…
-
I am trying to flash a hi3516ev200 without tftp (i am unable to get a link).
Normal boot:
```
System startup
Uncompress Ok!
U-Boot 2016.11-g2fc5f58-dirty (Sep 06 2019 - 15:13:30 +0800)hi351…
-
I've successfully flashed a XM-Based CAM with Hi3516EV200 Chip. But there is a Problem with the image quality (see picture attached):
![vlcsnap-2021-04-25-09h22m25s822](https://user-images.githubus…
-
#### General troubleshooting steps
- [x] I understand that [if I ignore these instructions, my issue may be closed without review](https://github.com/Homebrew/homebrew-cask/blob/master/doc/faq/clos…
-
```
$ brew cask zap steam
==> Implied "brew cask uninstall steam"
==> Running uninstall process for steam; your password may be necessary
==> Removing launchctl service com.valvesoftware.steamclean
==…